- 220V AC power supply
- Test the leakage current of MLCCs at the fastest speed of 6.8ms simultaneously over 8 channels
- Conduct high-speed leakage current testing of large-capacity MLCCs in the high current range (1mA)
- Improve testing reliability using the contact check function
- Build a flexible system by making best use of the individual settings of each channel
- Note: An input/output terminal connection cable is required separately
- Current input terminal connector and voltage output terminal plug are not included (Voltage input terminal connector is included)
The Hioki SM7810-20 is a super megohmmeter for testing leakage current in the Multilayer Ceramic Capacitor (MLCC) manufacturing process. The device can make high-speed measurements in as fast as 6.8 ms over 8 channels simultaneously. The Power Source Unit SM7860 is a specially designed power source unit that supports multi-channel systems and provides functions required for the MLCC test line. An 8-channel or 16-channel dual-line voltage setting function enables up to 32-channel output. A test system combining the SM7810-20 and SM7860 is ideal for integration into automated equipment and can be used to build the fastest MLCC leakage current test line. The SM7810-20 comes with a 220 V AC power supply.
Features of the Super MΩ HiTESTER SM7810-20
6.8 ms measurement time (from the acceptance of the trigger to INDEX output)
Measurement finishes in just 6.8 ms, including the contact check and decision (when the measurement speed is FAST). The measurement time was reduced by 30% compared to HIOKI's conventional model, which helps to reduce the machine tact time.
Make individual settings for each channel
The range, measurement voltage, and comparator can be set for each channel. Simultaneous measurement can be performed in a combination of 8-channel x 1-stage, 4-channel x 2-stage, or 2-channel x 4-stage according to the system configuration, which provides flexibility to adapt to the configuration of the automated equipment.
Improve reliability using contact check
Perform contact check despite the high-speed measurement. Elimination of judgment errors resulting from contact failure of the probe improves testing reliability.
Features of MLCC Leakage Current Test System Combining the SM7810-20 and SM7860 (not included)
The Super MΩ HiTESTER SM7810-20 can be used to build an MLCC leakage current test line capable of performing 8-channel simultaneous measurement at the industry's fastest speed of up to 6.8 ms, which helps to reduce the tact time of automated equipment and thus MLCC manufacturing costs.
Combined use of the Super MΩ HiTESTER SM7810 and the Power Source Unit SM7860 enables building a test system ideal for integration into automated equipment. The power source unit can be selected depending on the maximum applied voltage and functionality to suit various types of test line, including the charge-and-discharge test line.
Interface and Input/Output Terminals
Note: The SM781020 is produced to order. An input/output terminal connection cable is required separately.
|9637||Hioki 9637 RS-232C Cable for PC, 9 pin - 9 pin, Cross, 5.91 ft. (1.8 m) Length||
|9638||Hioki 9638 RS-233C Cable, PC, 9 pin - 25 pin, for the 3153||
|9151-02||Hioki 9151-02 GP-IB Connector Cable (2 Meter)||